While the precision of these ultra-accurate clocks may seem impressive, they aren’t nearly as good at keeping time as laboratory clocks, which are 100 times more precise. And research is under way to make them perform even better. But setting aside the quest for ever more accurate timepieces that could prove or disprove the laws of physics, atomic clocks have become an everyday necessity in the modern world.

WHAT ARE THE PRACTICAL USES OF AN ATOMIC CLOCK?

Atomic clocks are characterised by two physical values: accuracy and stability over a given period of time. A clock is selected depending on what it will be used for. Less accurate but highly stable atomic clocks are the most widely available and least expensive on the market, but here we have chosen to focus on the most accurate clocks that can function autonomously.

The accuracy of satellite navigation systems depends on the proper synchronisation of these clocks — a difference of just one microsecond can lead to a positioning error of 300 metres. Synchronisation must therefore be accurate to within 1/100 of a microsecond. Satellite clocks must also be able to function without being adjusted for at least 12 hours. In other words, these clocks must be accurate to less than 1 second over 140,000 years.

Europe has developed the GALILEO satellite navigation system which will rival GPS by the end of the decade. GALILEO will be more accurate than GPS and will provide a guaranteed signal quality that will open up new applications, particularly for air navigation. Thales is involved through its MIS business, which has developed an atomic clock for 2nd generation satellites.

Image result for ATOMIC CLOCKS AND THE IMPORTANCE OF BEING ON TIME

Another everyday activity that relies on atomic clocks is telecommunications. When we place a call or send data across a network, our information travels via different operators, without us knowing who or how many of them there are. This information is sent in packets and then put back together once it arrives at its final destination.

If the networks are not functioning at the same speed, information may be lost or the data highways can become congested. To avoid this, the International Telecommunication Union imposes a standard for operators that limits the difference in speeds between two networks. These accuracy requirements — 1 second over 3,000 years — can only be met by atomic clocks.

The network synchronisation requirement applies to high-speed mobile networks (4G) but also to electricity distribution networks, which must link energy sources with identical frequencies and synchronised phases. The development of smart grids has made the use of accurate clocks even more essential.

Banks also need very accurate clocks to guarantee the time and date stamps of high-frequency transactions with microsecond accuracy. These systems generally use clocks based on special GPS receivers designed to determine the time and date of the transactions and the order in which they were performed.

Arun
admin@mywebalarm.site

Leave a Reply

Your email address will not be published. Required fields are marked *